AirTies AP-301 User Manual

USER MANUALWireless Access PointRepeaterBridge

In the "Internet Protocol (TCP/IP) Properties" window, go to "IP Address"tab. Enter 192.168.2.10 in the "IP Address" fie

In the window that appears,right-click on the "Local AreaConnection" icon and select"Properties". This will bring upthe "Loc

4. Installation SettingsYou can setup your AP-301 using the web user interface. First, open aweb browser (e.g. Internet Explorer, Mozilla Firefox, Net

4.2. Wireless NetworkAs a wireless access point, the AP-301 enables mobile devices to accessthe local network.Clicking on the "WIRELESS " me

4.3. Setting the Operating ModeThe AP-301 is a 3-in-1 device: it can operate as either an access pointor a repeater or a bridge.To set the operating m

 On the computer(s) that will be connected to the AP-301 wirelessly,start the utility program for the Wireless Access Card (e.g. "Intel Proset&

Using more than one AP-301 as a repeater, and taking advantage ofthe AirTies Mesh Technology®, you can extend and strengthen yourwireless network.AirT

In the "Repeater Settings" page, you will find a list of available accesspoints and repeaters the AP-301 can connect to.Check the box to the

4.3.3. Configuring the AP-301 as a BridgeYou can include a wired device (e.g. printer) to your wireless networkby connecting the device to the LAN por

In this window, you will see a list of all the available wireless access pointsthat the AP-301 bridge can connect to. Check the box next to theaccess

 To enable WPA encryption, click on the "WPA" button in the "WirelessSecurity" screen.Click on the "PSK" button and ent

 You must activate WPA2 and set the same network key in all thewireless devices that will communicate with the AP-301.4.4.3.WEP Security SettingsAir

 Check the Enable WEP Encryption box. Depending on which encryption level you choose, enter a network key in the corresponding field. 64-bit hexade

To add a new user, enter the MAC Address of the device in the "AuthorizedUsers" field and click "Add". The MAC addresses that you

4.7. ToolsThe AP-301 Web interface provides advanced management tools for:Restart, Reset to factory settings and Firmware update. Go to "TOOLS&qu

 Ports: 1 Ethernet port (10/100, auto MDI/MDIX), 5V DC power in Wireless transmit power: 20dBm EIRP Wireless security: WPA (802.1x, TKIP, PSK), WPA

YM.AP.301.UM.EN.D00 Rev 26072007

Manual OverviewThis manual guides you through the steps necessary for setting up andconfiguring the AirTies AP-301 54Mbps 802.11g Wireless AccessPoint

1.Introduction...11.1.Main Features...

1. IntroductionThe AirTies AP-301 is an IEEE 802.11b/g compliant, 54 Mbps wirelesscommunication device that can be used as a Wireless Access Point,Rep

 IEEE 802.11b/g compatible, 54Mbps Wireless Access Point, Repeater,Bridge Backward compatible with 11Mbps 802.11b wireless devices AirTies Mesh

3AirTies AP-301 User Manual2. Connecting the CablesThe correct way of connecting the AP-301 is shown in the figure below.LANPower10/100 Ethernet port

4AirTies AP-301 User Manual3. Preparing For Installation3.1. Assigning a local IP address to a computer that isrunning WindowsXPThe installation sett

In the "Internet Protocol (TCP/IP) Properties" window, enter 192.168.2.10in the "IP Address" field and 255.255.255.0 in the "